manualshive.com logo in svg

Fisher & Paykel WM1280J, Инструкция по установке/Руководство пользователя

Поделиться
Скачать
Fisher & Paykel WM1280J Скачать руководство пользователя страница 42

40

BEFORE YOU CALL FOR SERVICE

PROBLEM

DISPLAYED AS

WHAT TO DO

Too many 

suds.

Machine will stop and flash 

 for 10 minutes 

while waiting for suds to dissipate. The machine 
will not beep during this time. After 10 minutes the 
machine will automatically restart. At any point during 
that 10 minutes you can touch 

 to restart the 

machine, but it is recommended that the machine be 
left to restart automatically.
Check you are using a suitable detergent.

Check you are not overdosing the detergent.

Check the standpipe height for the drain does not 
exceed 1200mm.

Door is 

locked.

The temperature in the drum is over 60°C therefore 
it is not safe to open the door. Wait until the 
temperature drops below 60°C.
Check the water level in the drum. If the level is above 
the bottom of the door seal, the door cannot be 
opened. Use the ‘Add a Garment’ button if you wish  
to add or remove items (WM1490F, WM1490P and 
WM1480P models only).
If the drum is still moving, wait for it to stop before 
attempting to open the door.

Door is open.

Close the door fully and touch 

 .

Try opening and closing the door again.
Reposition the load, make sure the load is correctly in 
the drum and that protruding items are not stopping 
the door from closing.

Содержание WM1280J

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды