15
GETTING STARTED QUICKLY
1
Press ‘POWER’ to activate your washer.
2
Select your wash cycle by turning the SmartTouch™ Control Dial.
3
Choose your wash options, if you wish to select options different from the default
options for the cycle.
4
Touch to start the cycle.
●
●
If you make an invalid selection the washer will beep to alert you.
●
●
When the cycle finishes, your washer will perform end of cycle beeps and then turn
off automatically.
●
●
If you wish to stop your washer at any point during a cycle simply touch
to pause the
cycle. There may be a slight delay while the drum comes to a stop, then the door will
unlock. Under certain conditions however the door will remain locked for safety reasons
(refer to the ‘Safety features’ section).
●
●
If you wish to cancel or change the wash cycle once a cycle has started, simply touch
the
button then select the new cycle. Touch
to restart the washer.
IMPORTANT!
●
●
For the best fabric and colour care, remove your clothes as soon as the cycle has
finished.
●
●
Failure to follow the advice in this guide may result in damage to your garments and
your expectations of wash performance may not be met.
3
4
