Changing Pre-set Options
Option Adjustment Mode
After using your washer a number of times you may want to fine tune some of the options to suit your wash needs.
There are a number of pre-set options which can be altered:
1. Changing the COLD wash temperature to CONTROLLED COLD.
2. The out of balance recovery routine.
3. The number of beeps at the end of the cycle.
4. Resetting to factory default settings.
To Enter Option Adjustment Mode
1. Turn machine on at the power outlet but
do not
touch POWER.
Touch and hold the KEYLOCK and START/PAUSE buttons for 3 seconds.
You will hear 3 quick beeps indicating you have entered Option Adjustment
mode. The machine will show the default setting for the COLD wash
temperature.
The diagram on page 33 shows how the wash cycle icons
relate to the options you can change.
2. Use the buttons on the panel to make your changes to the pre-set options.
3. Press POWER to return to normal mode. Your washer will automatically
remember your changes.
Fig. 32 Entering Option
Adjustment mode
Adjusting Your Options
1. Enter Option Adjustment mode (refer to page 32).
2. The diagram below shows how the wash cycle buttons relate to the options you can change. It also shows what
will be displayed when you first enter Option Adjustment mode. Options you can change are accessible using
Updated: Mon, 06 Jun 2022 10:14:27 GMT
Powered by
1
