the REGULAR, HEAVY, EASY IRON and ALLERGY cycle buttons only.
Use this diagram to help you adjust the options, ie select the REGULAR cycle button to modify the cold wash
temperature, select the HEAVY cycle button to change the out of balance (OOB) recovery process, and so on.
Fig. 33 WashSmart Option Adjustment mode
3. Use the DELAY START MORE
button on the panel to scroll through the available settings of your selected option, eg to change the number of
beeps at the end of the cycle.
Fig. 34 Changing the pre-set options
Wash Temperature
Controlled Cold
If the temperature of your cold water supply is very low and you choose to do a COLD wash, you will not get an effective
wash. The CONTROLLED COLD option solves this problem by adding a small amount of hot water to raise the
temperature of the wash to approximately 68°F (20°C).
1. Enter Option Adjustment mode (refer to page 32).
2. Select the REGULAR cycle.
3. Select COLD wash temperature by touching the WASH TEMP button (if not already selected).
4. The digital display shows the temperature adjustment possible. The default setting is “tAP”, which is the same
temperature as the incoming water from the cylinder for cold water.
• Touch the MORE button so “0” is displayed. Your washer will now adjust the cold temperature to approximately
Updated: Mon, 06 Jun 2022 10:14:27 GMT
Powered by
2
