37
CHANGING PRE-SET OPTIONS
Controlled Cold (not available on QuickSmart™ washer)
If the temperature of your cold water supply is very low and you choose to do a
‘Cold’ wash, you will not get an effective wash. The ‘Controlled Cold’ option solves this
problem by adding a small amount of hot water to raise the temperature of the wash
to approximately 20°C.
1
Enter Option Adjustment mode (refer to page 34).
2
Select the ‘Regular’ cycle.
3
Select ‘Cold’ wash temperature by touching the ‘Wash Temp’ button (if not already
selected).
4
The digital display shows the temperature adjustment possible. The default setting
is
, which is the same temperature as the incoming water from the supply for
cold water.
5
To get ‘Controlled Cold’, touch the ‘More’ button until
is displayed. Your washer
will now adjust the cold temperature to approximately 20°C. Each of the remaining
settings equals an approximate 1.0°C temperature increase or decrease from this point
(excluding
).
6
Touch ‘POWER’
to save the setting (if you wish to make no other changes).
Note: if you always use ‘Cold’ or Controlled Cold’ water, we recommend that a ‘Warm’
or ‘Hot’ wash be used regularly, eg every 5th wash should be at least a warm one. Warm
water is needed to help maintain the cleanliness of your washer.
Wash
Temp
Wash
Temp
WashSmart™ Eco washer and WashSmart™ washer
(WashSmart™ Eco washer panel is shown)
Changing the cold wash temperature setting from cold tap to ‘Controlled Cold’
