Fisher & Paykel SmartLoad DE62T27G Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 56

background image

6

Important Safety Instructions

WARNING

Electric Shock Hazard

Follow the safety precautions outlined in this User Guide.

Failure to do so can result in death or electric shock.

Safety Precautions

  Read all instructions carefully before using this dryer.
  Use this dryer only for its intended purpose as described in this User Guide.
  To minimize the possibility of electric shock, unplug this dryer from the power supply or

disconnect the dryer at the household distribution panel (by removing the fuse or switching off
the circuit breaker) before attempting any user maintenance or cleaning.

Installations and service must be performed by a qualified or licensed contractor, plumber or

gasfitter qualified or licensed by the state, province, or region where this appliance is being
installed.

This dryer must be properly installed and located in accordance with the Installation Instructions

before it is used.

This dryer must be properly grounded to conform with all governing codes and ordinances.

Follow details in Installation Instructions.

  Do not install or store the dryer where it will be exposed to water or exposed to the weather.
  Connect to a properly protected, rated and sized power supply circuit to avoid electrical overload.
  Do not repair or replace any part of the appliance or attempt any servicing, unless specifically

recommended in the published user repair instructions that you understand and have the skills
to carry out.

When disconnecting the dryer, pull by the plug rather than the cord or junction of the cord plug,

to avoid damage to the cord or junction of the cord plug.

Make sure the cord is located so that it will not be stepped on, tripped over or otherwise subject

to stress or damage.

Do not tamper with the controls or the lid lock.
Note: Pressing the

POWER

button does NOT disconnect the dryer from the power supply, even

though the lights are out.

Do not operate this dryer if it is damaged, malfunctioning, partially disassembled or has missing

or broken parts, including a damaged cord or plug.

This dryer must be directly connected to an approved fixed electrical outlet. It cannot be

plugged into an extension cord.

«
...
4
5
6
7
8
...
»

Содержание SmartLoad DE62T27G

























































Отзывы:

Нет отзывов

Похожие инструкции для SmartLoad DE62T27G

Бренд: Magic Страницы: 20

Бренд: American Dryer Corp. Страницы: 67

Бренд: Amana Страницы: 2

Бренд: Rankam Страницы: 16

Бренд: SEVERIN Страницы: 56

Бренд: Slinger Страницы: 8

Бренд: Bosch Страницы: 10

Бренд: Bosch Страницы: 10

Бренд: Bosch Страницы: 32

Бренд: Bosch Страницы: 10

Бренд: Bosch Страницы: 8

Бренд: Bosch Страницы: 10

Бренд: Bosch Страницы: 8

Бренд: Bosch Страницы: 8

Бренд: Bosch Страницы: 8

Бренд: Bosch Страницы: 8

Бренд: Bosch Страницы: 8

Бренд: Bosch Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды