17
!2
ALIGN YOUR PRODUCT INSIDE THE CABINETRY
IMPORTANT!
●
●
It is important that all four corners of the product is supported firmly onto the floor to eliminate any movement.
●
●
Installing the refrigerator on a soft or uneven/unlevelled floor may result in twisting of the product and poor door sealing.
●
●
Raise the product using an 11mm hex socket or 4mm hex Allen key. One turn of height adjusting nuts is equivalent to 1mm height travel.
Note: Maximum turn — 20mm.
D
1
Turn the front (
A
) and rear (
B
) adjustment screws
to extend the feet (
C
) until it engage the floor.
– Clockwise turn raises the height and
counter-clockwise turn lowers the height.
2
Turn the front adjustment screws (
A
) clockwise to
raise the front of the refrigerator until the fixing
brackets (
D
) contact the ceiling of the cabinetry.
3
Turn the rear adjustment screws (
B
) clockwise
to raise the rear of the refrigerator until the
refrigerator doors are flush with the front face of
adjacent walls
4
Continue turning the adjusting screws alternately
between front and rear feet until you achieve the
correct alignment.
B
A
Add ruler to show flushness x 4?
Place a ruler on
the front of the
product to check
flushness top
and bottom, left
and right.
E
C
5
Place a ruler (
E
) on the front of the product
to check flushness top and bottom, left and
right. Check the gaps between refrigerator
and adjacent cabinetry are even on both sides.
– This step will help ensure the refrigerator
is level with the adjacent cabinetry.
5
Gently push the front of the product to check
the stability.
A
B
