8
CUSTOM PANEL PREPARATION
TOP PANEL – REAR VIEW
Note:
Dimensions are shown in Metric (mm)
Dimensions apply for the preparation and
installation of custom panels.
For the second panel mirror and repeat dimensions
using inner bottom corner as the reference point.
Dwg and Dxf files of the above panel
preparation download the folder on
http://thekitchentools.fisherpaykel.com
392.3mm
54.8mm
35mm
297.4mm
50mm
457.5mm
50mm
126.1mm
34.7mm
414mm
CUSTOM PANEL PREPARATION
BOTTOM PANEL – REAR VIEW
Note:
Dimensions are shown in Metric (mm)
Dimensions apply for the preparation and
installation of custom panels.
Dwg and Dxf files of the above panel
preparation download the folder on
http://thekitchentools.fisherpaykel.com
385mm
128mm
29.1mm
58.1mm
492mm
416mm
50mm
58.1mm
5
CUSTOM DOOR PANEL INSTALLATION DIMENSIONS
The following drawings apply to non-Ice & Water models only. For Dwg and Dxf files of the below panel preparation download the folder on thekitchentools.fisherpaykel.com
TOP PANEL – REAR VIEW
R1.25 REF
12x Pilot holes recommended for
bracket attachment.
(Do not penetrate front surface).
All measurements to be made
from inner bottom corner.
For the second panel mirror
and repeat dimensions using
inner bottom corner as the
reference point.
R1.25 REF
10x Pilot holes recommended
for bracket attachment.
(Do not penetrate front surface).
BOTTOM PANEL – REAR VIEW
Handle details
Top panel
– Ensure handle is
mounted 65mm from inner
edge of panel to the centre
– this will avoid interference
with brackets.
Bottom panel
– Ensure handle
screw heads are counter sunk
into back of panel to avoid
interfering with hanging
bracket.
