Fisher & Paykel RS6121VL2K1 Скачать руководство пользователя страница 47

Страница: 47 / 48

TO BE COMPLETED BY THE INSTALLER

All models

Check all parts are installed.

Ensure the appliance is level.

Ensure the appliance is securely fastened to the cabinetry with the
supplied anti-tip bracket and fittings.

Ensure the door can open and close freely with no resistance from
surrounding cabinetry.

Ensure hinge limiting pin is fitted for 90

door swing.

Ensure all internal and external packaging is removed from the
appliance before use.

Complete and keep for safe reference:

Model

_____________________________________________________________

Serial No.

_____________________________________________________________

Purchase Date

_____________________________________________________________

Purchaser

_____________________________________________________________

Dealer Address

_____________________________________________________________

Installer’s Name

_____________________________________________________________

Installer’s Signature

_____________________________________________________________

Installation Company _____________________________________________________________

Installation Date

_____________________________________________________________

FINAL CHECKLIST

Содержание RS6121VL2K1

















































Результаты поиска

Содержание RS6121VL2K1

Отзывы:

Бренды по названию

Популярные бренды

Fisher & Paykel RS6121VL2K1, Руководство по установке

Результаты поиска

Содержание RS6121VL2K1

Отзывы:

Бренды по названию

Популярные бренды