Check gaps top and
bottom, left and right
using a ruler.
(
A
)
Centre the appliance
within the alcove using
the adjacent cabinetry
walls as guide.
Rear foot
adjustment screw
Front foot
adjustment screw
B
C
26
Rear foot
Front foot
Adjusting appliance inside the cabinetry
Tools
Cross-head screwdriver
Powered driver
(optional)
Ruler
IMPORTANT!
z
Turn front and rear adjustment screws clockwise to raise height of appliance
and counter-clockwise to lower height.
z
One turn of adjustment screw is equal to 0.5mm height adjustment.
z
Use a cross-head screwdriver to turn the screws. If using a powered driver,
use low torque setting.
Turn adjustment screws alternately until you achieve correct alignment.
Check alignment gauges while adjusting the screws to maintain alignment
of the appliance.
(
C
)
Check top and bottom, left and right gaps again.
Turn front and rear adjustment screws clockwise to extend the feet until it engages
the floor, and top bracket reaches ceiling of alcove.
(
B
)
Counter-clockwise
to lower feet
Clockwise
to raise feet
ALIGN APPLIANCE INSIDE THE CABINETRY
1
2
3
4
A
Содержание RS6121VL2K1
Страница 2: ......
