Installation instructions
7
Choosing the location
The diagrams above determine the dimensions of a unit where you will be able to install your
oven. This appliance can be installed as an under the counter or column oven.
Recessed fitting
Centre the oven in the unit to guarantee a minimum distance of 20mm with the adjacent unit.
The recessed unit must be made of heat-resistant material (or coated with this type of material).
For increased stability, fasten the oven to the unit with 2 screws through the holes provided for
this purpose on the lateral uprights.
1) Make a Ø 2 mm hole in the wall of the unit to avoid the wood splitting.
2) Fasten the oven with the 2 screws.
Note: To ensure that your installation is compliant, do not hesitate to contact a household
appliance specialist.
Important!
We accept no liability in the event of an accident or incident resulting from grounding that is non-
existent, faulty or incorrectly fitted.
If the electrical installation in your household requires modification for you to connect your
appliance, contact a qualified electrician.
If the oven presents any anomaly, disconnect the oven from the power supply or remove the fuse
from the oven connection line.
550
597
400
23
378
560
550
min.
560
550 min.
457
(option 'A')
478
(option 'B')
445
20
50
10
50
450
(option 'A')
470
(option 'B')
Lower trim
(optional accessory,
purchased separately)
450
(option 'A')
470
(option 'B')
Two installation options:
Option ‘A’ - oven only (overall height 457 mm)
Option ‘B’ - oven + lower trim kit accessory
(overall height 478 mm)
Note: If you are installing an appliance directly
over another, you have the option of using the
supplied black metal shelf cover to conceal the
shelf front that would be visible between the two
appliances. This needs to be fitted before
the lower trim kit and/or appliance is installed.
Refer to the instructions packed with the shelf
cover accessory kit.
Important!
If you choose Installation option B, you will need to install the
lower trim kit BEFORE you install the appliance. Refer to the
instructions packed with the lower trim kit.
