14
Using your appliance
Setting and adjusting the time
After connecting your appliance or after a long period without it being connected to the mains,
the “
12:00
” button will flash on the display.
To set the time on the clock
Display
■
Set the time using the
+
and
-
buttons then validate by
pressing the
button.
12:00
06:30
When the time has to be changed
Display
■
Press the
button then press
twice. The time will flash.
Program the new time (e.g. 7:30) using the
+
and
-
buttons.
■
Validate by pressing
.
■
A beep will be emitted to confirm that the new time has been
set.
06:30
07:30
Adjusting the contrast
Programming
Display
■
Press the
button then a few seconds later press
,
until the indication
-CO-
appears on the display.
■
Adjust the contrast using the
+
or
-
buttons and validate
with the
button.
Timer function
Programming
Display
■
You can program the “Timer” function of your oven. Press
the
button then
.
■
Adjust the programming time using the
- / +
buttons, for
example 1 minute. Validate by pressing
. The display
shows the time again but the countdown starts.
■
Once the time has ended, the timer emits a series of beeps
to warn you. These beeps can be stopped by pressing any
button.
