Fisher & Paykel OR90SCG6, Руководство пользователя

Страница: 71 / 80

71
TROUBLESHOOTING
Cooktop burners
PROBLEM POSSIBLE CAUSES WHAT TO DO
There is a power failure
– can I still use the
cooktop burners? Power outage in your area. The cooktop burners can still be
used. To light them:
1
Holding a lighted match to
the flame spreader, push in
on the control dial and turn
anticlockwise to LITE.
2
When the flame is burning all
the way around the burner,
you may adjust the heat.
IMPORTANT!
If the flame is blown out
during a power failure, turn
the dial immediately to O
(OFF), as the burner will not
automatically relight and
gas may escape.
The flames have
suddenly gone out. A draft or a spill has extinguished
the flame. No action required. The burner
will detect this and automatically
relight. However,
if there has been a large spill, we
recommend turning the burners
off and cleaning the burners and
sump area. See ‘Care and cleaning’
for instrucions.
There is a slight
‘extinction pop’ or
flash after I’ve turned a
cooktop burner off. This is normal for LP gas and
requires no action.
The burner flames are
uneven, very large, yellow
or yellow-tipped or sooty. Technical fault: the gas is the
wrong type or hasn’t been
adjusted properly. Do not use your cooktop burners.
Contact your Fisher & Paykel
trained and supported service
technician or Customer Care.