Fisher & Paykel OR90SCG6, Руководство пользователя

Страница: 47 / 80

47
Burner Controls
The dials control the flow of gas through the valve.
Using the single burners
GRAPHICS LOCATION
1
Identify the dial of the burner you
want to use.
2
Starting from the O (OFF) position,
push the dial in and turn it
anticlockwise to
HI .
z
The ignitor on the burner will spark.
3
After the burner has lit keep the
dial held in for a few more seconds
before releasing.
z
Releasing the dial too soon will
extinguish the flame.
GRAPHICS LOCATION
4
When the burner has lit, adjust the
flame anywhere between
HI and LO .
z
Do not adjust the dial between
HI and
O (OFF).
5
When you have finished cooking, turn
the clockwise back to
O (OFF).
z
If you are using LP gas, there may be
a slight ‘extinction pop’ or flash at the
flame spreader a few seconds after
the burner has been turned off. This is
normal for LP gas.
USING YOUR GAS COOKTOP
Using the dual burner
6
Starting from the
O
(OFF) position,
push the dial in and turn it anti-
clockwise to either HI
GRAPHICS LOCATION
to light both
the inner and outer rings or
HI
GRAPHICS LOCATION
to
light the inner ring only.
GRAPHICS LOCATION