11
!4
FINAL CHECKLIST
Complete and keep for safe reference:
Model
____________________________________________________________
Serial No.
____________________________________________________________
Purchase Date
____________________________________________________________
Purchaser
____________________________________________________________
Dealer Address
____________________________________________________________
Installer’s Name
____________________________________________________________
Installer’s Signature
____________________________________________________________
Installation Company ____________________________________________________________
Installation Date
____________________________________________________________
TO BE COMPLETED BY THE INSTALLER:
Make sure the oven is level and securely fitted to the cabinetry and the oven door opens and closes freely.
Make sure all the internal packaging has been removed from the oven cavity.
Make sure all oven vents and openings are clear and are free of any obstruction/damage.
Check the lower trim is still undamaged — open the oven door slowly to its fully open position and check if there is adequate clearance between the bottom of the door and the lower trim.
This is to ensure correct air circulation. Should the lower trim become damaged, straighten the trim and ensure the oven door opens fully without obstruction.
Check that the power supply cable does not touch any metal parts that can become hot during use.
IMPORTANT!
Failure to make sure all oven vents are clear may result in poor product performance.
Make sure that the isolating switch is easily accessible by the customer.
TEST OPERATION:
Turn the power to the oven on. On some models, the display should light up and show
:
.
Advise the customer to follow the instructions in their user guide in section ‘First use’.
FISHERPAYKEL.COM
© Fisher & Paykel Appliances 2019. All rights reserved.
The product specifications in this booklet apply to the specific products
and models described at the date of issue. Under our policy of continuous
product improvement, these specifications may change at any time. You
should therefore check with your Dealer to ensure this booklet correctly
describes the product currently available.
