20
The Options
For all the options mentioned below you first need to enter the
OPTIONS
menu (by pressing either
the
UP
or
DOWN
Options button). Then use the Options arrows to scroll through the options until
the one you want is displayed. Press
ADJUST
to select it, and
HOME
to return to the main screen.
1. Temperature
Cold
(Incoming water from faucet)
Cold+
Warm/Cold
Warm
Warm/Hot
Hot
The wash temperature option selects the temperature of the detergent activating wash (the first
phase of an Eco Active™ wash), or the agitation stage of a traditional wash.
Cold+ (Controlled Cold)
The temperature of cold water varies depending on the season and area you live in. The lower
the water temperature the less effective the wash.
COLD+
solves this problem by adding a small amount of hot water, when necessary, to raise the
temperature above 60˚F (20˚C) to give a more effective cold water wash.
2. Wash Advance
Use the
WASH ADVANCE
option to advance the cycle or start the cycle at a particular stage.
Press
ADJUST
repeatedly until the part of the cycle you want is highlighted. Wash Advance is a
good option if you want to skip certain parts of the cycle. Perfect if you only want to rinse/spin
clothes, or if you want to prewash clothes etc.
The
PRE-WASH
option is a cold, 6 minute pre-wash for extra
dirty loads. Your Intuitive will beep at the end of drain and
display a message to tell you that it is waiting for you to add
the detergent for the main wash. Add detergent and press
START/PAUSE
to begin the main wash cycle.
3. Save Water
Use the
SAVE WATER
option when you want to minimize
the amount of water used. The rinse type your washer will
choose depends on the type of fabric you are washing.
There are two Save Water options.
SAVE WATER
and
ECO
(SAVE WATER++)
. Dependng on how much water you wish
to save will determine which option you select.
SAVE WATER
reduces the amount of water by altering the
rinse option.
