33
Trouble Shooting
Linting Problems
Is the lint bucket full? When lint reaches the top of the transparent section of the bucket it
needs emptying.
Have you separated lint-shedding garments (e.g. towels) from lint receiving garments (e.g.
synthetics).
Have you checked your pockets for tissues or other items that could have been left in them?
Have you over-loaded your dryer? Over-loading can result in linting problems due to reduced
airflow and lint not being able to collect on the filter.
Have you over-dried your load? Over-drying can cause lint-attracting static electricity. Try a
lower
HOW DRY
Dryness Setting or use
AUTO-SENSING
instead of
TIME DRY
.
Is the lint bucket in place?
Static problems
Have your clothes been over-dried? Choose a lower dryness setting.
Items shrinking
Has the load been over-dried? Choose a lower dryness setting.
Is tumble-drying recommended? Check care labels inside garments.
If you selected
TIME DRY
- did you set it to dry for too long?
Has the correct temperature been used to dry the garment? Check the care label.
Clothes are creased
Does the load sit higher than the lint bucket? Your dryer is over-loaded, decrease the load size.
Did you remove your clothes as soon as the dryer was finished? Use the
CREASABLES
option, if
you cannot return to the dryer in time.
Have your clothes been over-dried? Select a lower dryness level. Check your garments care-
labels.
Drum door will not open
Refer to page 29 – Power Failure for more information, or contact your Fisher & Paykel
Authorised Service Agent.
Lid will not open
Is the
CREASABLES
option selected? Press
START/PAUSE
to open the lid.
Содержание Intuitive DEIX1
Страница 2: ......