Installation Dimensions
Property
(mm)
M.
Installation height
Ducted
Recirculation
min. 635 – max. 1035
min. 675 – max. 1035
N.
Height top of cooktop to base of product
Electric cooktop
Gas cooktop
min. 600 – max. 750
min. 650 – max. 750
Rangehood installation height above the cooktop is the user’s preference. Lower installation heights will improve
the efficiency of capturing cooking odours, grease, and smoke. This rangehood must be installed between the
minimum and maximum dimensions indicated in the table above.
Venting options
Attention should be given to ensure that any applicable regulations concerning the discharge of exhaust air are
fulfilled.
The rangehood can be installed to operate with the exhaust air ducted externally from the kitchen, or installed to
operate with the exhaust air recirculating within the kitchen.
Ducted
For ducted installation it is recommended that 125 mm diameter, rigid or semi-rigid ducting is used. This will
require a 135 mm (min) round hole in the ceiling or wall. Care should be taken to position the hole correctly.
For optimal efficiency use the shortest and straightest duct route possible and use rigid or semi-rigid ducting for
reduced noise and increased airflow. Flexible metal ducting should only be used as a last resort (ie in difficult
installations) and if used ensure that it is straight and smooth and extended as much as possible.
Recirculating
To enable the product to operate with the air recirculating, please purchase a recirculation diverter and carbon
filters (refer to the ‘
’ section). The recirculation diverter is installed after a short length of
ducting and is required to channel the air out the side vents at the top of the chimney and the carbon filters are
required to remove odours.
Updated: Thu, 08 Oct 2020 05:42:05 GMT
Powered by
8