background image

2

Congratulations on purchasing a Fisher & Paykel dryer. Your new dryer will give you the 
convenience of tumble drying and your clothes the advantage of not being subjected to the 
harsh overdrying effects of the sun. Your clothes will feel softer, retain their shape better and will 
require less ironing.

At Fisher & Paykel we aim to provide products that are simple to use, ergonomic and energy 
efficient. Thousands of tonnes of washing and 75 years of laundry experience have been 
programmed into your dryer to help give you the best possible performance.

We hope you enjoy your new dryer. We have certainly enjoyed designing it.

Cost to dry

Many people are reluctant to use a dryer because 
they believe they are expensive to run. True enough, 
sunshine is free, but we don’t always have sunshine 
and the benefits to you and your clothes can make 
machine drying worthwhile.

The following example of a 2.5 kg load is used to 
demonstrate the cost of drying.

4 T-shirts
1 Sweat Shirt
5 Pair Underpants
5 Pairs Socks
1 Pair Trousers
2 Pair Shorts
3 Handkerchiefs

This load was spun at a high spin speed (1000 rpm) and dried in an Electronic auto-sense dryer 
on dryness level 4 (Medium dry and Extra dry lights on). The load took 60 minutes to dry.

For example if power costs 20 cents/unit, the load will cost approximately 30 cents to dry  
(1.48 units x 20c). Check with your local Electricity Supply Authority for your domestic tariff.

Before using your dryer

Ensure the correct installation has been used for the dryer type. Installation depends on how the 
dryer is vented.

Read the Safety and Installation instructions carefully.

Remove and discard the plastic power cord pin cover (required for transit only).

Ensure the pieces of tape surrounding the drum opening are removed. The tape MUST be 
removed before operating the dryer.

Introduction

Electronic auto-sense dryer

Содержание Front loading dryers

























Отзывы: