Fisher & Paykel FabricSmart WA1068P Скачать руководство пользователя страница 6

Страница: 6 / 54

INSTALLATION INSTRUCTIONS

Accessories

Check if you received the following accessories with your Fisher & Paykel washer. You will
find them inside the drum or attached to the packaging.

1 x hose guide

2 x inlet hoses.

Unpacking

To ensure the best performance from your new washer please follow the instructions below.

Removing the packaging

Please ensure that the base packer has been removed before operating your machine.

Tilt washer backwards to remove packer

Remove the outer packaging.

Tilt the machine backwards and walk it off the
base packer one foot at a time (ensure the lid is
still taped down).

Remove the base packer from under the
machine by tilting the machine backwards and
pulling the packer out the front.

Remove the tape, lift the lid and remove the
bowl packer from the bowl.

Remove the hoses and accessories.

Keep the base packer and bowl packer in case
they are required for future transit.

Содержание FabricSmart WA1068P























































Результаты поиска

Содержание FabricSmart WA1068P

Отзывы:

Похожие инструкции для FabricSmart WA1068P

Бренды по названию

Популярные бренды

Fisher & Paykel FabricSmart WA1068P, Руководство по установке

Результаты поиска

Содержание FabricSmart WA1068P

Отзывы:

Похожие инструкции для FabricSmart WA1068P

Бренды по названию

Популярные бренды