Fisher & Paykel DW24U2I1, Руководство по установке

Страница: 11 / 23

9
IMPORTANT!
When connecting drain line to
disposer, check to be sure that
drain plug has been removed.
Dishwasher will not drain if plug
is left in place.
Remove drain plug
9 CAVITY PREPARATION
Water Connection
Recommended HOT
(Maximum 140°F/60°C).
Supplied hose to suit 3⁄8” (9mm)
male compression fitting.
Water Pressure
Water softener models
Max. 1 MPa (145 psi)
Min. 0.1 MPa (14.5 psi)
Models without water softener
Max. 1 MPa (145 psi)
Min. 0.03 MPa (4.3 psi)
IMPORTANT!
The power outlet must be located in
a cabinet adjacent to the dishwasher
cavity. 110-120 VAC max. 15 A
Service Holes
Can be located either side of dishwasher, close to the rear face and
the floor, as illustrated, for access to the water supply and drain.
z z
If the hole is through wood, make sure its edges are smooth
and rounded.
z z
If the hole is through metal, ensure you fit the supplied Edge
Protector to prevent damage to the power cord.
Moisture
protection tape
must be applied
3/8”
(10mm)
COUNTERTOP
WARNING!
Incorrect placement of the hole
will result in damage to hoses.
N
R
Q
F
C
L
M
A
G
C
A
M
L
Ø 1 1/2”
(38mm)
Max 1/2” (10mm)
Max distance between
hole edge and floor
Max 1/4” (5mm)
Max distance
between hole edge
and rear inner face
max. 17 11/16”
(450mm)
min. 7 7
/8” (200mm)