MOVE INTO THE CAVITY
SECURE THE DRAWER
SECURE THE DRAWER
REFIT THE DRAWER
9
9
10
10
2
1
4
5
4
3
Before refitting the drawer,
ensure the hoses are not
twisted and the latches at
the rear of each drawer
runner are facing forward.
Ensure the drawer clips on
both sides are reset.
Ensure the drawer is
now rotated
clockwise back.
5
product. A bracket must match A
slot and ‘B’ bracket must match ‘B’ slot.
1
2
1
3
3
optional
(x2)
1
2
3
The product has three
pairs of fixing points:
Ensure the sound insulation is
repositioned correctly.
optional
Ensure hoses and cord
are not kinked or twisted.
If top mounting
brackets are being
used, ensure they’re
securely fitted before
sliding product into
cavity.
max.
19 mm
a pair of optional
brackets on the top
a pair of fixing
holes on the bottom
a pair of formed
brackets on the
chassis side
OPTIONAL
1
2
3
4
4
optional
max.
¾ ”
(19 mm)
Open the drawer halfway.
Using a flat-bladed
screwdriver, prise the plastic
grey plug out of the trim
moulding.
Replace the plastic
grey plug back into
the trim moulding and
ensure the trimseal is
facing forward.
Repeat for all four brackets.
Using a small Philips screwdriver,
screw through the trim moulding,
securing the side mounting
bracket to the cabinetry. Do not
damage the rubber trimseal.
max.
19 mm
(1,2) -2- 599685B DD60S TALL installA2 NZGB.indd 6/7/09 3:48:37 PM
(1,2) -2- 599685B DD60S TALL installA2 NZGB.indd 6/7/09 3:48:37 PM
