Fisher & Paykel DH9060P2 Скачать руководство пользователя страница 34

Страница: 34 / 48

TROUBLESHOOTING

The following is a list of problems you may encounter when using this appliance and some
suggestions that may help to correct the problem. If you still have problems, contact your
Fisher & Paykel trained and supported service technician.

PROBLEM

POSSIBLE CAUSES

WHAT TO DO

Pressing

POWER

does

not turn on

the dryer

Fault with household
power supply.

Try plugging in and turning on another
electrical device.

Dryer does

not heat

Full water tank.

Refer to ‘Emptying the water
collection tank’.

The dryer has progressed
to

COOL

Check the progress lights – are

COOL

END

lights illuminated?

Refer to ‘Control panel’.

Pressing

does not start

the drying cycle

Dryer door not closed
properly.

Open and close the door. Check that
the lint filter is correctly in place and not
obstructing the door.

Is the dryer displaying a user
warning or fault code?

Refer to ‘User warnings’ and
‘Customising a dry cycle’.

Water tank full or not
properly in place.

Refer to ‘Emptying the water collection
tank’. Ensure the water tank is properly
in place.

Dryer is overloaded.

Remove some items from the dryer.

DELAY START

function is set.

Refer to ‘Delay Start’ for
more information.

KEYLOCK

To disable press for three seconds.

Dryer keeps

stopping

and starting

The

WRINKLE FREE

option

has been selected.

Refer to ‘User warnings’ for
more information.

Dryer stops

working

mid-cycle

Power failure.

Press

POWER

and restart the

desired cycle.

Dryer has been paused.

Press to restart the cycle.

Dryer door is open.

Ensure the door is firmly shut.

Items fell off the rack
when using

RACK DRY

cycles.

Ensure the rack is installed correctly
(refer to ‘Drying rack’) and replace
garments that may have fallen from it.

Содержание DH9060P2

















































Результаты поиска

Содержание DH9060P2

Отзывы:

Бренды по названию

Популярные бренды

Fisher & Paykel DH9060P2, Руководство пользователя

Результаты поиска

Содержание DH9060P2

Отзывы:

Бренды по названию

Популярные бренды