30
Emptying the water collection tank
During the drying cycle, steam condenses into water and is collected in the water tank,
located at the top left of the dryer. It is important to empty the water tank after every load.
If the water tank becomes full during operation, the dryer will pause, display a user prompt
and beep to alert you.
Remove the water tank by holding onto
the handle and pulling outwards gently.
Ensure the tank is kept level when removed
to prevent the water from spilling.
Never run the dryer without the water tank in place unless the drain hose has been installed.
You do not need to empty the water tank if you have set up the drain hose to drain the
water automatically.
1
2
Pour the water down the sink or into a
bucket, and then put the tank back in place.
To empty the water tank:
CARING FOR YOUR DRYER
