31
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
Noises
Dryer is overloaded.
Remove some items from the dryer.
Dryer has a fault.
Continuous beeping or a musical
series of beeps with a message
displayed on the display.
Refer to ‘Fault codes’.
Beeps signalling the end
of a drying cycle.
End of cycle beeps can be turned off
refer to ‘Drying cycle options’.
Dryer has not been levelled
properly.
Refer to ‘Levelling the machine’ in the
installation section of this guide.
Dryer makes unfamiliar noises.
At the start of the cycle the dryer may
make some unfamiliar noises when the
compressor turns on. This is normal.
Vibration
Dryer is not installed on
a stable surface.
Ensure the dryer is installed on a flat,
stable surface. Refer to ‘Levelling the
machine’ in the installation section of
this guide.
Dryer is not level.
Ensure the dryer is correctly levelled.
Refer to ‘Levelling the machine’ in the
installation section of this guide.
Dryer is overloaded.
Remove some items from the dryer.
Creasing
Cycle selection not
appropriate for the load.
Select the ‘Easy Iron’ cycle to
minimise creasing.
Dryer is overloaded.
Remove some items from the dryer.
‘Dryness Level’ selected
too high for load type.
Try selecting a lower ‘Dryness Level’.
‘Wrinkle Free’ option not
selected.
Select the ‘Wrinkle Free’ option to
rotate the load at the end of the
drying cycle. Refer to ‘Wrinkle Free’
section of this guide for details.
Содержание DH9060P
Страница 1: ...INSTALLATION GUIDE USER GUIDE NZ AU HEAT PUMP CLOTHES DRYER DH9060P models ...
Страница 2: ......
Страница 4: ......