manualshive.com logo in svg

Fisher & Paykel DH8060P3, Руководство пользователя, Страница: 42 / 52

Поделиться
Скачать
Fisher & Paykel DH8060P3 Скачать руководство пользователя страница 42

42

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSES

WHAT TO DO

Noises

Dryer is overloaded.

Remove some items from the dryer.

Dryer has a fault.

Continuous beeping or a musical 
series of beeps with a message 
displayed on the display. 
Refer to ‘Fault codes’.

Beeps signalling the end 
of a drying cycle.

End of cycle beeps can be turned off 
refer to ‘customising drying cycle’.

Dryer has not been 
levelled properly.

Refer to ‘Levelling the dryer’.

Dryer makes unfamiliar noises.

At the start of the cycle the dryer may 
make some unfamiliar noises when the 
compressor turns on. This is normal.

Vibration

Dryer is not installed on 
a stable surface.

Ensure the dryer is installed on a flat, 
stable surface. Refer to ‘Levelling 
the dryer’.

Dryer is not level.

Ensure the dryer is correctly levelled. 
Refer to ‘Levelling the dryer’.

Dryer is overloaded. 

Remove some items from the dryer.

Creasing

Cycle selection not 
appropriate for the load.

Select the 

EASY IRON

 

cycle to 

minimise creasing.

Dryer is overloaded.

Remove some items from the dryer.

DRYNESS LEVEL

 

selected 

too high for load type.

Try selecting a lower 

DRYNESS LEVEL

.

WRINKLE FREE

 option 

not selected.

Select the 

WRINKLE FREE

 option to 

rotate the load at the end of the 
drying cycle. Refer to ‘Wrinkle Free’.

Содержание DH8060P3





















































Отзывы:

Нет отзывов