manualshive.com logo in svg

Fisher & Paykel DH8060P3, Руководство пользователя, Страница: 39 / 52

Поделиться
Скачать
Fisher & Paykel DH8060P3 Скачать руководство пользователя страница 39

39

TROUBLESHOOTING

The following is a list of problems you may encounter when using this appliance and some 
suggestions that may help to correct the problem. If you still have problems, contact your 
Fisher & Paykel trained and supported service technician. 

PROBLEM

POSSIBLE CAUSES

WHAT TO DO

Pressing 

POWER

 

 

 

does 

not turn on 

the

 

dryer

Fault with household  
power supply. 

Try plugging in and turning on another 
electrical device. 

Dryer does 

not

 

heat

Full water tank. 

Refer to ‘Emptying the water 
collection tank’. 

The dryer has progressed  
to 

COOL

. 

Check the progress lights – are 

COOL

 or 

END

 lights illuminated? 

Refer to ‘Control panel’.

 

Pressing

 

 

does not start 

the drying cycle 

Dryer door not closed 
properly. 

Open and close the door. Check that the 
lint filter is correctly in place and not 
obstructing the door.

Is the dryer displaying a user 
warning or fault code? 

Refer to ‘User warnings’ and ‘Fault codes’.

Water tank full or not 
properly in place. 

Refer to ‘Emptying the water collection 
tank’. Ensure the water tank is properly 
in place. 

Dryer is overloaded. 

Remove some items from the dryer. 

DELAY START

 function is set. 

Refer to ‘Delay Start’ for more 
information. 

KEYLOCK

 is ON.

To disable press   for two seconds.

Dryer keeps 

stopping 

and starting

The 

WRINKLE FREE 

option 

has been selected. 

Refer to ‘

Wrinkle Free

’ for more 

information. 

Dryer stops 

working  

mid-cycle

Power failure. 

Press 

POWER 

 

and restart the 

desired cycle. 

Dryer has been paused. 

Press 

 

 

 to restart the cycle. 

Dryer door is open. 

Ensure the door is firmly shut. 

Items fell off the rack 
when using 

RACK DRY

 cycles.

Ensure the rack is installed correctly  
(refer to ‘Drying rack’) and replace 
garments that may have fallen from it.

Содержание DH8060P3





















































Отзывы:

Нет отзывов