Fisher & Paykel DE8060P Скачать руководство пользователя страница 39

Страница: 39 / 48

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSES

WHAT TO DO

Dryer is not

draining.

Drain hose not connected
to the water tank.

Ensure the drain hose is connected
correctly. Refer to ‘Draining’.

Water tank not in
place correctly.

Ensure water tank is properly in place.

Drain hose or drain blocked
or damaged.

Check drain hose (if connected) and
drain for blockages or damage.

Clothes getting too

hot or damaged.

Cycle selected not
appropriated for the load.

Ensure the cycle selected is
appropriate for items in the load. Refer
to pages ‘Drying cycles’.

Items removed from dryer
before the end of cycle cool
down had finished.

Removing items before cool down may
damage clothing if it is not spread
out and exposed to air to cool once
removed from the dryer.

Dryer is beeping,

displaying

unfamiliar light

patterns and/ or

a message on the

digital display.

Dryer is experiencing a fault.

Try turning the dryer off and waiting
1 minute before turning it back on.
Refer to ‘Before you call for service’
and ‘Fault codes’.

Small puddle of

water coming from

under the machine.

Water tank not correctly
in place.

Ensure the water tank is correctly
in place.

Water tank may need to
be emptied.

Empty the water tank.

Water tank may be damaged.

Check the water tank for any signs
of damage.

Drain hose may not be
attached properly at the
machine end.

Ensure the drain hose is attached
properly. Refer to ‘Draining’.

Drain hose could be damaged.

Check the drain hose for damage.

Drain hose has slipped out of
the drain.

Ensure the drain hose is securely fixed
in place. Sometimes drain hoses can
move or get displaced, which may lead
to water draining onto the floor.

Drain may be blocked.

Check the drain for any blockages.

Dryer door not closing
properly, affecting the seal.

Ensure the dryer door is closed
properly and there is nothing
obstructing the door opening.

Содержание DE8060P

















































Результаты поиска

Содержание DE8060P

Отзывы:

Бренды по названию

Популярные бренды

Fisher & Paykel DE8060P, Инструкция по установке/Руководство пользователя

Результаты поиска

Содержание DE8060P

Отзывы:

Бренды по названию

Популярные бренды