manualshive.com logo in svg

Fisher & Paykel DE8060P, Инструкция по установке/Руководство пользователя

Поделиться
Скачать
Fisher & Paykel DE8060P Скачать руководство пользователя страница 37

37

TROUBLESHOOTING

The following is a list of problems you may encounter when using this appliance and some 
suggestions that may help to correct the problem. If you still have problems, please contact 
your Fisher & Paykel trained and supported service technician.

PROBLEM

POSSIBLE CAUSES

WHAT TO DO

Pressing 

POWER

 

 

does not turn 

on the dryer.

Electrical cord not plugged into 
a power socket. 

Plug cord into a power socket. 

Power switch not switched on.

Switch power on. 

Fault with household 
power supply. 

Try plugging another electrical 
appliance into the same socket. Turn 
off the power at the power point. 
Unplug the dryer from the power 
socket. Wait 60 seconds, plug it back 
in, turn it on and try again.

Dryer does 

not heat.

Dryer set to 

COOL AIR

 cycle.

Check what cycle the dryer is set to. 
Refer to ‘Drying cycles’. Change to 
preferred cycle.

Full water tank. 

Empty the water tank. Refer to ‘Caring 
for your dryer’. 

The dryer has progressed  
to 

COOL

. 

Check the progress lights– are 

COOL

 or 

END

 lights illuminated? 

Refer to ‘Control panel’.

 

Touching

 

 

does 

not start the 

drying cycle.

 not touched firmly enough. 

Touch 

 again. 

Dryer is paused.

 light will be flashing. Touch 

 to 

resume the cycle. 

Dryer door not closed properly. 

Open and reclose the door. 

Is the dryer displaying a user 
warning or fault code? 

Refer to ‘User warnings’ and 
’Fault codes’.

Water tank full or not properly 
in place. 

Empty the water tank. Refer to ‘Caring 
for your dryer’. Ensure the water tank 
is properly in place. 

Lint filter needs to be emptied.

Empty the lint filter and ensure it is 
correctly in place. 

Dryer is overloaded. 

Remove some items from the dryer. 

DELAY START

 function is set. 

Refer to 

‘DELAY START’

 for 

more information. 

Содержание DE8060P

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды