• Do not touch or operate the dryer with wet hands or with bare-feet.
• A damaged power cord must be replaced by a Fisher & Paykel trained and supported service
technician. The appliance must not be operated until it is repaired, as there is risk of electric
shock.
• Do not operate this dryer if it has been damaged during transport. Contact your Fisher & Paykel
dealer or Fisher & Paykel trained and supported service technician.
The appliance must not be supplied through an external switching device, such as a timer, or
connected to a circuit that is regularly switched on and off by a utility.
Completing the Installation
Installation Test Cycle
Ensure the installation test cycle is completed before you dry any items in your dryer. This is to check
that your dryer is installed correctly and that it is functioning properly prior to use.
1. Turn your dryer on by pressing the ‘Power’ button.
2. Select the ‘Time Dry’ cycle for 30 minutes. Ensure the drum is empty and the door is closed (you will hear it
click shut).
3. Touch the
button. The drum will start rotating.
◦ Observe the dryer for any problems.
◦ The dryer will beep and display any faults on the screen if there are any problems. Refer to
'Before You
Call for Service'
for more information.
4. At the completion of the cycle open the door and check that there is warmth inside the dryer. This indicates the
dryer is operating normally
Updated: Mon, 05 Oct 2020 18:08:12 GMT
Powered by
10
