Fisher & Paykel DD60SCTW9 Скачать руководство пользователя страница 3

3

!

 WARNING!

Electric Shock Hazard 

Failure to follow this advice may result in 

electrical shock or death.

•  Before installing the DishDrawer, remove the 

house fuse or open the circuit breaker.

•  This appliance must be earthed. In the event 

of a malfunction or breakdown, earthing will 

reduce the risk of electric shock by providing a 

path of least resistance for electric current. This 

appliance is equipped with a cord having an 

equipment-earthing conductor and an earthing 

plug.

•  The plug must be plugged into an appropriate 

outlet that is installed and earthed in accordance 

with all local codes and ordinances. 

•  WARNING - Improper connection of the 

equipment-earthing conductor can result in a 

risk of electric shock. Check with a qualified 

electrician or service representative if you are in 

doubt as to whether the appliance is properly 

earthed.

•  Do not modify the power supply plug provided 

with the appliance - if it will not fit the outlet, 

have a proper outlet installed by a qualified 

electrician. Do not use an extension cord, adapter 

plug or multiple outlet box.

!

 WARNING!

Cut Hazard

Failure to use caution could result in injury.

•  Take care - panel edges are sharp.

SAFETY AND WARNINGS

WARNING!

To reduce the risk of fire, injury to persons or damage when using the appliance, follow the 

important safety instructions listed below. Read all the guidance before using the appliance. 

Servicing

 

z

Do not repair or replace any part of the appliance unless specifically recommended in 

this guide. All other servicing should be undertaken be a Fisher & Paykel trained and 

supported service technician or qualified person.

Installation

 

z

Installation of this DishDrawer requires basic mechanical and electrical skills.

 

z

Installation must comply with your local building and electricity regulations.

 

z

Remove all packaging materials supplied with the dishwasher.

 

z

Be sure to leave these Instructions with the Customer.

 

z

At the completion of the installation, the Installer must perform the Final Checklist.

 

z

This dishwasher is manufactured for indoor use only.

 

z

Ensure all water connections are turned OFF. It is the responsibility of the plumber and 

electrician to ensure that each installation complies with all Codes and Regulations.

 

z

The DishDrawer MUST be installed to allow for future removal from the enclosure if 

service is required.

 

z

The switched power outlet must be outside the dishwasher cavity, so that it is 

accessible after installation.

 

z

Care should be taken when the appliance is installed or removed to reduce the 

likelihood of damage to the power supply cord and hoses.

 

z

If the DishDrawer is relocated from one installation site to another it must be kept 

upright to avoid damage from water spillage.

 

z

Ensure only supplied hoses are used for connection. Old hoses should not be reused.

 

z

Failure to install correctly could invalidate any warranty or liability claims.

 

z

If the product is installed in a motor vehicle, boat or similar mobile facility, you must 

bring the vehicle, boat or mobile facility containing the product to the service shop at 

your expense or pay the service technician’s travel to the location of the product. 

SAVE THESE INSTRUCTIONS

The models shown in this installation guide may not be available in all markets and are subject to 

change at any time. For current details about model and specification availability in your country, 

please go to our website www.fisherpaykel.com or contact your local Fisher & Paykel dealer.

Содержание DD60SCTW9

















Отзывы: