10
CABINETRY PREPARATION
SERVICE ACCESS
MOISTURE PROTECTION
REAR
WALL
SHELF
PROFILE
SERVICE HOLE DIMENSIONS
MM
A
Maximum distance between rear of cavity and service hole
5
B
Maximum distance between shelf and service hole
10
C
Minimum diameter of service hole
57
A
B
C
z
We recommend locating the service holes on either side of the DishDrawer as shown below.
z
If the hole is created through wood, ensure the edges are smooth and rounded
z
If the holes is created through metal, ensure the edge protector is fitted.
Align the supplied moisture protection
tape to the cabinetry as illustrated
Ensure this area is free of debris
before carefully applying the tape to
the surface.
1
10mm
SIDE PARTITION
SELECT CABINETRY SECURING METHOD
1
Recommended method*
*Frameless cabinetry only
METHOD A
Secure to cabinetry via brackets
METHOD B
Secure via drawer removal
If securing via the drawer removal method,
ensure the marked locations provide
adequate support.
If there are no side partitions, construct timber
bracing to secure the fixings to.
Содержание DD60SCTW9
Страница 2: ......
