background image

Wok support
(Jet models only)

Coffee pot support
(Jet models only)

Wok on raised
area of trivets

Hints and tips

To get the best out of your cooktop follow these simple suggestions.

  Do not use an asbestos mat between the flame and the saucepan as this may cause serious 

damage to your cooktop.

  Never use plastic or aluminium foil dishes on the burners.

  Saucepans should have thick flat bottoms. Food in a saucepan with an uneven bottom will take 

longer to cook. Heavy saucepans may bend the pan support or deflect the flame.

  Match the bottom of your saucepans with the cooking zone and see that it is stable. This will 

give you the most efficient cooking. Do not let large saucepans or frying pans overlap the 
bench as this can deflect heat onto your benchtop and damage the surface.

  For the simmer and semi rapid burners pots should be larger than 12cm in diameter (smaller 

pots can be used with the coffee pot trivet).  The coffee pot support allows small items to be 
placed on burners.  (Jet models only).

  The fish/skillet burner (Jet 9 models only) may be used with pots 18cm in diameter and above. 

A fish kettle on the fish burner is not only useful for fish, but for steaming long vegetables like 
cobs of corn, Chinese broccoli, long beans and asparagus.

  The wok burner is primarily designed for woks but may be used with 17- 23cm diameter pots 

with care. When using a wok only use the circular wok stand supplied with your Jet cooktop.

6

7

Содержание CG602M





















Отзывы: