Fisher & Paykel AS/NZS 1044 Скачать руководство пользователя

Страница: 1 / 10

Installation instructions

• Read these instructions carefully before installing or using this product.

• Please make this information available to the person responsible for installing the product as it

could reduce your installation costs.

• In order to avoid a hazard, this appliance must be installed according to these instructions for

installation.

This cooktop has been designed and constructed in accordance with the following codes and specifications:

AS/NZS 60335-1

General Requirements for Domestic electrical appliances

AS/NZS 60335-2-6

Particular Requirements for Domestic electrical cooking appliances

AS/NZS 1044

Electromagnetic Compatibility Requirements.

Product dimensions and clearances

The installation shall comply with the dimensions in Figs. 1 and 2, bearing in mind the following requirements:

• A minimum clearance of 40 mm for CE302 models and 30 mm for CE604 models has to be kept between the

bottom of the cooktop and the top of an underbench appliance or a thermal protection barrier (see Figs. 5-7).

https://producthelp.fisherpaykel.com/au/Cook/Cooktops/Electric/Two_Burners/CE302CPX1/User_Guide_CE302CPX1/02_Installation_instructions

Updated: Sat, 09 Mar 2019 07:23:30 GMT

Содержание AS/NZS 1044










