36
When you have finished the cycle
Turn off the taps to prevent the chance of flooding should a
hose burst.
Unplug the machine from the wall socket.
Cleaning your
AquaSmart 2
™
Before you start cleaning your
AquaSmart 2™
washer, ensure
that it is turned off at the wall (or that the Keylock mode has
been activated).
Cleaning the soft touch buttons, screen and topdeck
Use a soft damp cloth to wipe all surfaces, and wipe dry. Avoid
using chemical or scouring cleaners, as these will damage the
paint and plastic surfaces of your washer.
You can also remove the lid for cleaning. Open the lid fully,
grasp the lid on both sides. Lift in an upward motion, as shown.
To replace the lid, hold the lid vertically and align both hinges
before pushing downwards and slotting back into place.
Cleaning the detergent and fabric softener dispensers
Wipe out the detergent dispenser with a damp cloth. The funnel
of the fabric softener dispenser (the top) clicks off easily. Simply
place a finger down the centre and lift. The fabric softener well
is not removable and needs to be wiped clean periodically. If the
siphon tube looks partially blocked use a cotton bud to clean.
Cleaning the inside of your washer
It is important that you occasionally clean the inside of your
machine. Your
AquaSmart 2™
has a bowl clean cycle specifically
for this purpose. We recommend that you use the CLEAN ME cycle
5 – 6 times a year and suggest that you do not wash clothes
during this cycle. Your washer will also show a reminder on screen
to do this after every 100 cycles.
Cleaning steps
1
Add approximately 2 scoops of a good quality powdered detergent directly into
the detergent dispenser.
2
Turn your machine on and scroll to LIFESTYLE cycles. Press SELECT.
3
Scroll to the CLEAN UP screen.
Press SELECT.
4
Select CLEAN ME.
Fig.24 Removing the
fabric softener funnel
Fig.23 Removing the lid
Caring for your AquaSmart 2™ washer
Содержание AquaSmart 2
Страница 1: ...NZ AU Installation instructions and User guide AquaSmart 2 clothes washer ...
Страница 2: ......