Fisher & Paykel AquaSmart 2, Инструкция по установке и руководство пользователя, Страница: 34 / 48

32
Settings menu
After using your AquaSmart 2™ washer you may wish to fine-tune some of the options available
to suit your individual needs. Any options changed in this menu will be a permanent change,
unless RESET DEFAULTS is selected (refer to page 35).
To access the Settings menu:
1
Turn your AquaSmart 2™ washer on.
2
Scroll to the right through the wash cycles until you reach the Settings menu.
3
Press SELECT to enter the menu.
Temperature Adjust
The wash temperatures can be adjusted if you think they are too hot or
too cold.
Access the Settings menu (refer above).
Scroll to the TEMPERATURE option, and press SELECT.
Use the SCROLL button to move through the boxes to decrease or
increase the wash temperature (the numbers in the boxes are in
degrees). Each box is approximately equal to a 2°C change.
Press SELECT to confirm your selection and return to the Settings menu.
Adjust Heaviness
When HEAVY cycle is selected you may like to increase the rigorousness
of the wash. This option is beneficial for those situations where a slightly
rougher wash is needed to clean heavy duty, hardwearing, particularly
soiled items (eg farm wear, work wear).
Access the Settings menu (refer above)
Scroll to the ADJUST HEAVINESS option, and press SELECT.
Touch the right SCROLL button to increase to the desired roughness.
The lowest setting is the default for the cycle, each bar to the right
equates to a 2% increase in ‘roughness’.
Press SELECT to confirm your selection and return to the Settings menu.
Aqua Plus
Activating this option adds additional water to the Aqua rinse in a High
Efficiency wash cycle. This will give you a little extra rinsing for those with
sensitive skin. You can also use this option if you tend to wash a lot of
dark garments.
Access the Settings menu (refer above).
Scroll to the AQUA PLUS option, and press SELECT.
Scroll to highlight either AQUA PLUS rinse ON or AQUA PLUS rinse OFF.
Press SELECT to confirm your selection and return to the Settings menu.