3
3
FOR ACTIVESMART™ INTEGRATED REFRIGERATORS
Removing the old filter
The filter is located behind the toe kick grille.
1
Remove toe kick grille by inserting fingers into the left and right
square openings on the grille. Pull grille towards you.
2
Pull the freezer drawer out slightly, the filter is located on the
left-hand side.
Installing the new filter
3
Using the filter removal tool, align the tool to the cartridge handle
and turn 90° counterclockwise to loosen (
A
).
4
Remove the tool, grasp firmly onto the cartridge handle and pull
towards you to remove. Discard the old filter.
3
Pull the freezer drawer out slightly to access
the filter casing. Align the filter correctly (
C
).
4
Using the filter tool, push the filter firmly
inside the casing all the way into the filter
head.
5
Rotate the filter head clockwise 90° to lock in
place (
D
).
B
C
D
E
A
Note: It is not necessary to turn the water supply off when removing or installing the water filter.
1
Remove the plastic wrapping from the new
filter and then remove the protective cap (
B
).
2
Remove toe kick grille by inserting fingers
into the left and right square openings on the
grille. Pull grille towards you.
6
Ensure the filter is in the locked position (
E
).
Remove filter removal tool and close the
freezer drawer.
IMPORTANT!
After installation, the water filter MUST be
flushed. Refer to ‘Flushing the water filter’
for details.
