Fish Tuning CSP5, Руководство пользователя

Страница: 2 / 6

Lock Mode

Any time you see an displayed, the switch is locked

If the switch is set to start locked or it’s locked in a tune you will
have to enter the password to exit. In most other cases, removing
power will get you out of locked mode.
Button Combinations That Work With the Ignition On
Changing Tunes

Press any single button to instantly switch tunes. The display will
indicate the current tune.

Press and hold any single button until the display changes to
and the switch will be locked in that tune until you enter the lock
code. This lasts even through key off/key on cycles and overrides
the default start up tune. As soon as you enter the password this
will be forgotten.
Adjusting Brightness

Press buttons
1
and
2
together to increase brightness.

Press buttons
4
and
5
together to decrease brightness.

Press buttons
1
and
2
for 3 seconds to enable the backlight.

Press buttons
4
and
5
for 3 seconds to disable the backlight.

50 seconds after the last adjustment, the setting will be saved.
Disabling the Start Locked Mode

If you’ve enabled start locked mode, pressing and holding buttons
3
and
5
until appears and then entering the password will
disable start locked mode. After correctly entering the password a
will appear to indicate that the start locked feature has been
disabled.
Show Firmware Version

Press and hold
2
and
4
until the display goes blank. Release the
button and the version will be displayed followed by a and then
back to normal.
Tune Display Only

Press and hold
1
and
5
until the display shows and then quickly
release the buttons. Until you press another button the display will