Using Your Fish Tuning Digital CSP5 Switch
The first section covers the functions of the switch when the
ignition is on. The second section covers configuring the switch by
pressing buttons while you turn on the ignition.
The Features of Your New Digital CSP5 Switch
Instantly change to any tune with one button press
Lock in any tune till the password is entered
Always be on your chosen tune when you turn the key on. No
more cold morning starts on the wrong tune!
May be configured to start with a password required so strangers
can’t easily change tunes
May be logically removed from the CAN bus for testing.
May be used as a tune indicator for testing other switches
Effectively prevents other devices from changing the tune. Not
really, but it will generally change it back where it belongs within
1/20 of a second.
The current tune will be shown with , , , , or . The
displays shows the tune reported by the ECM so if it doesn’t yet
know the tune, it will show a .
The switch will not allow any other device to successfully change
the tune. Well, more correctly, if it sees the tune has been
changed, it will immediately change it back. I’ve always thought
that if the driver installs a switch, that the passenger should not be
able to use the scan tool to mess with him.
Document conventions
Button presses will be shown using:
1
,
2
,
3
,
4
or
5
.
The current display will be shown using: , , , , , , etc....
Default Settings
Start locked off
Startup tune set to 1
Password length set to four
Password set to: 1, 2, 3, 4
