2
FISCHER
ULTIMATE
TM
SERIES
Procedure
Fischer UltiMate
™
Bend Relief : Maximum performance, minimum hassle
■
No tool required : 5 easy steps to complete self assembly
■
Clean cut : perfectly adjust the bend relief to your cable diameter with a simple blade
■
Long lasting:
- Resists 10,000 constraints at a 90° angle
- Operates in temperatures between -55°C to +135°C
- UV resistant
1
Manually assemble the straight clip on the
nut. The clip must be inserted with the teeth
facing downwards, towards the connector.
See Fig.A
2
Make sure your potting entirely fills the
space between the clip and the nut,
all the way to the top of the clip.
3
Let the epoxy settle for the necessary time, depending on the material used.
What you need
■
Bend Relief *
■
Clip
■
Blade
Fig. A
* From September 2013 the appropriate mounting nut is delivered with all UltiMate connectors.
