Shaker-Amp-400-E-2016-12.doc
4
Safety Information for the Shaker Amp:
There are air slots at the side of the unit. During operation, the unit produces heat, therefore do not
close these slots (danger of overheating).
There are no parts inside the appliance which need maintenance service.
Before opening the appliance, pull the power plug.
Only operate the appliance at grounded current systems which fulfill VDE requirements. When in
operation, the Shaker Amp needs protective earthing.
Do not expose to humidity. When switched off, clean with a slightly damp cloth.
As loudspeaker connection, provide cable with at least 1.5 sqmm wire cross-section, when the cable
is longer than 6 m 2.5 sqmm wire cross-section.
Do not connect load impedances less than 3 ohms to the amplifier output. Doing so can damage or
overheat the amplifier.
Specifications
Weight:
2.8 kg
Dimensions (W x H x D):
483 x 195 x 44 mm (1
9’’, 1U high)
Operating Voltage:
115 / 230V AC, 50/60 Hz, switchable
Fuse 2.0AT @ 230V, 4.0AT @ 115V
Output Power:
500W @ 4 ohms
Input Connectors:
Balanced XLR/jack combi connector
and link-out via XLR
, In/out jack ¼ ‘’ balanced
Input Gain
Adjustable
– 8 dB to +60 dB (with -20 dB Pad)
Output Connectors:
Speakon-Out, Binding Post
Crossover (active):
Add-on low pass adjustable from
40 to 200 Hz, 12 dB/oct.
Add-on high pass 20 Hz, 12 dB/oct.
WARRANTY:
The manufacturer grants a warranty of 24 months from the date of purchase by the original owner for defects in
materials or workmanship. When the appliance has been subject to misuse or has been altered, the warranty
expires. When returning the defective unit, enclose the receipt, pack the unit to avoid transit damage, and
return the unit carriage prepaid. The manufacturer does not accept carriage forward consignments.
HANS ULRICH-BREYMANN-STR. 3, D
–74706 OSTERBURKEN
Phone: +49 (0) 62 91- 6 48 79-0, Fax: 6 48 79 19
E-MAIL:
, Internet:
