Shaker-Amp-400-E-2016-12.doc
1
Manual
SHAKER AMP 400
[Art. No. 001151]
Dear customer:
Thank you for choosing
FISCHER AMPS.
Please read this manual carefully prior to the first use, you will get important information for use
and safety of the unit. These safety and operating instructions should be retained for future
reference.
Should you have further questions, please do not hesitate to contact FISCHER AMPS.
Product Description:
Rackmount Amplifier (19-inch) to operate a low frequency transducer ButtKicker LFE with a power of
500W into 4 ohms. A microphone preamp with add-on 48V phantom power and
–20 dB Pad switch is
integrated in the Shaker Amp 400 which allows to connect bass drum microphones directly. The combined
XLR/jack connector is equipped with a parallel out to loop the input signal. The add-on active crossover
(low pass 40 to 200 Hz / 12 dB/oct.) and an add-on high pass with 20 Hz adjust the signal if necessary to
the optimum working frequency of the shaker. The Shaker Amp 400 is perfect for use with the FISCHER
AMPS In Ear Amp or with a mixing console to operate the ButtKicker LFE low frequency transducer (4
ohms version). World-wide application possible 115V/230V AC
