FISCHBEIN Empress Series, Руководство оператора

Страница: 8 / 79

FISCHBEIN
®
MODELS 100 & 101 EMPRESS™ SERIES SEWING HEAD
OPERATOR’S MANUAL
REV. H 2005 / 11 7
2. INSTALLATION
2.1 UNPACKING PROCEDURES
Every Fischbein sewing head is packaged to protect the unit during normal shipping, storage and
handling. Each sewing head is packed in a corrugated box with cardboard padding surrounding it.
It is then taped shut. Before the unit is unpacked, inspect the box for any signs of damage incurred
during shipping. After the unit is unpacked, inspect the sewing head itself for damage. Report any
damages in writing to the shipper and to your authorized Fischbein representative. Be sure to
locate your sewing head’s serial number and model number and record these numbers for future
reference. Reading from left to right, the first six numbers that are stamped on the housing
represent the serial number. The next three numbers represent the model number. The model
number and serial number are also printed on the plate attached to the side of the housing.
The sewing head is very heavy and can be awkward to handle alone. For safety of the installers
and the sewing head, a dolly platform should be used to transport the sewing head.
2.2 DRIVE MOTOR RECOMMENDATIONS
A 1 HP or 746 W motor is recommended.
WARNING: MAXIMUM RPM FOR THE SEWING HEAD IS
1800 RPM AND MUST NOT BE EXCEEDED.