FISCHBEIN
®
MODELS 100 & 101 EMPRESS™ SERIES SEWING HEAD
OPERATOR’S MANUAL
REV. H 2005 / 11
24
3. Needle
and
Looper Clearance
1. Refer to
Illustration 20
. It is very important that the
needle (
D
) and the looper (
M
) do not touch during the
forward movement of the looper (
M
).
2. With the looper (
M
) at the full forward position, adjust
the looper (
M
) for a maximum 0.008” (0,2mm) gap
between the needle (
D
) and looper (
M
). Loosen screw
(
N
) and move the looper (
M
) to provide the gap.
3. Tighten screw (
N
) and re-check the gap.
4. Approximate
setting of the distance
between needle and looper
1. Refer to
Illustration 21
. Turn the machine and look from the
feed side.
2. For adjustment of the distance
X
, we use the adjusting Gauge
(part #10230) (
F
in
Illustration 22
) adjust the distance
X
.
See
Section 3.13
for more about the Gauge.
3. This distance is set as the looper (
B
) has reached the end of its
backward travel. If this distance is not correct (see
Illustration 22 and 23
), loosen the screw (
D
). The looper
holder (
C
) can be moved along its shaft (
E
) in a longitudinal
direction.
4. Once the correct distance for
X
is achieved,
tighten screw (
D
).
Illustration 21
Illustration 22
Illustration 20
Содержание Empress Series
