STEP 3
Set Front Wheels
Remove the thumbwheel
screw, which will allow the
new special grip tires to drop
into place. Then screw the
thumbwheel back into the same
position, securing the tires into
place. (The thumbwheel screw
should be inserted and screwed in
from the exterior of the walker.)
STEP 2
Start with the folded rollator on
the floor as shown.
4
STEP 1
Remove all parts and accessories,
laying them out so you can make
sure you have all parts as shown.
SPECIAL INSTRUCTIONS
Setting up your Perfect Walker is very simple and best done by
following these instructions. You will be using your walker within a
few minutes. It is recommended that you lay out all of the provided
components to ensure that you have easy access to them at each step.
NOTE: Please be sure to first carefully read the General Warnings and Safety Instructions.
SET-UP
Perfect Walker
™
Hand Assist
Bonus Bag
Brake Handles
Folded Rollator
Armrests with
attached Backrest
Bonus Beverage
Holder
Remove thumbwheel
screw and lower wheels.
Insert thumbwheel
screw and tighten.
SCAN CODE WITH PHONE’S
CAMERA FOR A DIRECT
LINK TO SET-UP VIDEO