Pink - Negative Start Trigger Input
Grey/Black - CAN High
Grey - CAN Low
Orange - ISO9141-2
Light Blue - Negative Emergency Brake Input
Light Blue/White - Positive Foot Brake Input
Yellow/White - Negative 250mA Rearm
Yellow - Negative 250mA Disarm
Blue - Negative 250mA Starter Kill
Brown - Positive Siren Output
Antenna and Option
Programming Port
- 6 Pin
Thermister Port - 2 Pin
Shock Sensor Port - 4 Pin
Remote Paging Sensor - 4 Pin
White - Positive Accessory Output
Green - Positive Ignition Output
Red - Positive 12 Volt Input
Yellow - Positive Starter Output
Black - Ground Input
Violet - Negative Status Output
To Optional
Anti Grind / Starter Kill
To Chassis Ground
To FT-820 Y-Adapter
Adapter Added In Line With
Vehicle’s Ignition Harness
Brown - Pin 1
Pink - Pin 2
Blue
- Pin
3
Orange - Pin 4
Light Blue - Pin 5
Grey - Pin 6
Wire Side View of
FT-820 Y-Adapter
FT-820 Y-Adapter
Legend
Required for Installation
May be Required for
Installation - Check Vehicle
Guide for More Information
- Leave Intact for Manual Transmissions
- Cut for Automatic Transmissions
Connector for ADS-TB HK
Connector for FT-RELAY
W
IRInG
G
uIde
fT-820
fT-820 I
nsTall
G
uIde
H
yundaI
/ K
Ia
R
emoTe
s
TaRT
and
a
laRm
www.firstechllc.com /ft820 | www.compustar.com/ft820
Copyright 2009 Firstech, LLC.
Page 3
Some units have wires that are all black but numbered. See
the side view of the Y-Adapter to correcpond pin number.
These connectors may not be present.
In this event connect to Black - Ground,
Red - 12V+ and/or Violet - Negative
Status Output to power up your bypass
module
