Page 7
Page 8
(2) RPS & Vibration mode on or off
Note :
Step 2 must be completed within 15 seconds. If not, start over at step 1.
Tones will sound for confirmation
STEP 1
(II+III)
2 sec
Button
PressedFor
Function
STEP 2
RPS on or off, tones will sound for
confirmation.
Vibration mode on or off, tones will
sound for confirmation.
(III)
(IV)
1/2 sec
1/2 sec
Note:
"
"
Represents pressing the button for 2 seconds.
" ( ) "
Represents simultaneously pressing the buttons.
" ( ) " Represents simultaneously pressing the buttons for 2 seconds.
I
button Proceeds in (1) (2) (3) (1)..... repeatedly.
At (2) , the icon will flash.
Note :
8
9
10
11
1/2 sec
1/2 sec
1/2 sec
II
III
IV
(I + II)
2 sec
2 sec
2 sec
Trunk Release
Auto-start Function – on/off
Panic, Press
I
to turn off the siren.
Siren Chirp – on/off
Valet Mode – on/off
Passive Arming – on/off
Timer Start Mode – on/off
Turbo Mode - on/off
(2W8000FMR)
2
nd
Car - on/off (2W8000FMR-2
nd
)
Shock Sensor – on/off
12
14
15
16
17
18
(I + III)
(II + III)
(II + IV)
(III + IV)
(I + III)
(I + II)
(I + IV)
1/2 sec
1/2 sec
2 sec
2 sec
2 sec
Programming Menu 1
Programming Menu 2
13
More Button Functions
(1) Time Setting
Tones will sound for confirmation
STEP 1
(II+III)
2 sec
Button
PressedFor
Function
Time setting is on. The numbers will
flash, and tones will sound.
STEP 2
(I)
(II+III)
1/2 sec
Change hour.
Change minutes.
Time setting is off. Tones will
sound.
STEP 3
STEP 4
(I)
(II)
1/2 sec
1/2 sec
2 sec
Remote-Pager Learn Routine
The Compustar system will allow up to three remotes to be programmed to one
vehicle. Please perform the following procedure to add or reprogram additional
remotes.
Step1 :
Activate Valet/Programming mode by manually turning the ignition
on and off five times (between Acc and On)
with the key within a 7 second period.
The parking light will flash once with successful
completion of this step.
Step2
:
Within a 7 second period after cycling the ignition for the 5th time,
press button
I
. The parking lights will flash once to confirm that the
transmitter has been programmed. You can continue programming
additional remotes. The parking lights will flash two times when the
programming mode has expired.
