First Water Flex-Chlorinator, Руководство по эксплуатации

Страница: 9 / 12

9
Pump Motor Diagram:
Problem : Water Motor does not click. Water does not flow past unit.
• Cause: No water flow to motor.
• Solution: Check that water is flowing to Flex-Chlorinator.
• Cause: Incoming water is connected to the outlet side of the pump
motor.
• Solution: Verify that the incoming water is connected to the inlet
(right side) of the pump motor.
Problem : Water Motor does not click. Water does flow past unit.
• Cause: Water motor is in “bypass” due to damaged parts on the in-
side of water motor or excessive wear of moving parts.
• Solution: Contact First Water for support.
Problem : Motor click a few times then stops.
• Cause: Unit is in bypass condition.
• Solution: Shut off water. Relieve pressure at the air vent. Restart wa-
ter.
• Cause: Clogged chemical feed tube.
• Solution: Inspect tube for blockage.
• Cause: Motor may be in bypass due to damaged internal parts.
• Solution: Contact First Water for support.
• Cause: O-Ring on pump stem may have excessive wear.
• Solution: Contact First Water for support.
Troubleshooting