68
Camera integration
C-RED 3 module is designed for easy integration in a subsystem. The user can remove screws and
spacers to directly connect circuits boards to its own mechanic system.
Please note that the user must take care of electronic components and boards to avoid short-circuit.
First Light Imaging will not be held responsible for any damage caused by a short-circuit or bad
assembly with the mechanical parts.
C-RED 3 module camera is factory-assembled with 4 spacers Ø6.5x5.4mm height, 4 spacers Ø6.5x7mm
height and 4 threaded spacers M3x10mm height. 4 screws at each side maintain spacers and ensure a
good position of all electronic boards.
Please avoid disconnecting the electronic boards. The camera uses high-performance connectors
which wear out very fast.
If you need to disconnect the electronic boards for your specific integration, please contact First Light
Imaging support (
).
Figure 31:
C-RED 3 module spacers illustration
Spacer Ø6.5x5.4 mm
Threaded spacer M3x10 mm
Spacer Ø6.5x7 mm
