16
Using the E920 Slider Arm
The E920 Slider Arm Kit offers the user an entire range of added
resistance settings and the ability to perform additional upper
body workouts.
To adjust, simply loosen the Adjustment Knobs, move Slider Arm
to desired length and secure. Very little tension is needed.
What do the numbers mean?
The numbers represent the length (in cm) from the center of the
axle to the center of the handgrip shaft bolt. The shortest Slider
Arm length is 12cm and the maximum length is 21cm. The range
of adjustment is 9cm.
Additional Exercises:
Training can now be achieved with both
left and right Handgrips moving parallel , rather than in an
opposed motion.
Step 1:
On the right Slider Arm Assembly, remove the adjust-
ment knob, loosen set screw and remove Assembly from axle.
Step 2:
As shown below, rotate right Slider Arm 180 degrees
and reinstall onto axle. There is an additional screw locator hole
located on opposite side of axle .
Содержание Fluid E920
Страница 1: ...Owners Manual Wheelchair Accessible ...
